Rare Earth Neodymium & Samarium Magnets

NEODYMIUM BLOCKS

neodymium magnets
rare earth magnets
neodymium
neodymium magnet
earth magnets
rare earth magnet
small magnets
n35
n35
sphere neodymium magnets
neodymium ring
neodymium ring magnet
neodymium magnets
neodymium magnets

where to buy magnets
cms magnetics
cms magnetics
neodymium magnets for sale
neodymium magnets for sale
ring magnets
round magnets
ceramic magnets
ceramic magnets
n52 magnets
neo magnets
neodymium magnets home depot
earth magnet
rare earth magnet home depot
buy magnets
large magnets
large neodymium magnets
neodymium magnet home depot
rare earth magnets for sale
strong magnets for sale
n52
ring magnet
where can i buy magnets
where to buy neodymium magnets
where to buy neodymium magnets

sabhagat.com
songlw.com
cypmpro.com
rdbuildings.com
Part No. Grade inMGO Dimensions/inches Approx. Weight

/lbs

Price per piece ($)
Thick Width Length 1 pc. 4

pcs.

25

pcs.

50

 pcs.

100 pcs.
NB006N-30H 30H 0.500 1.000 1.000 0.1340 27.72 25.74 23.76 20.59 15.84
NB006N-35 35 0.500 1.000 1.000 0.1340 17.50 16.25 15.00 13.00 10.00
NB11325N-35 35 0.100 0.130 0.250 0.0008 0.64 0.62 0.60 0.45 0.38
NB12525N-27 35 0.100 0.250 0.250 0.0016 0.90 0.86 0.84 0.63 0.53
NB045-35 35 0.045 0.101 0.200 0.0002 0.35 0.33 0.32 0.24 0.20
NB058N-35 35 0.500 2.000 2.000 0.534 61.60 55.00 49.50
NB0781547N-35 35 0.074 0.153 0.467 0.0014 0.72 0.70 0.68 0.51 0.34
NB112660N-35 35 0.110 0.260 0.600 0.0045 1.19 1.15 1.12 0.84 0.7
NB147N-35 35 1.000 2.000 2.000 1.068 117.50 94.00 84.60 72.85 65.80
NB15321-35 35 0.150 0.320 1.000 0.0128 2.80 2.70 2.63 1.97 1.64
NB1818375N-35 35 0.188 0.188 0.375 0.0035 0.98 0.94 0.92 0.69 0.58
NB188S375N-35 35 0.188 0.188 0.375 0.00354 1.49 1.44 1.40 1.05 0.88
NB239646-35 35 0.234 0.391 0.469 0.0115 2.25 2.13 2.00 1.50 1.25
NB25575-35 35 0.250 0.500 0.750 0.0250 5.48 5.28 5.16 3.87 3.23
NB30N-35 35 0.230 0.230 0.750 0.0106 5.1 4.92 4.80 3.60 3.01
NB502575-35 35 0.500 0.250 0.750 0.0250 3.82 3.69 3.60 2.70 2.25
NB50502N-35 35 0.500 0.500 2.000 0.1340 25.13 23.34 21.54 18.66 14.36

KEY: H = Higher heat capacity  

NOTE: An �N� in the second half of the part # indicates nickel plating

Other sizes and grades may be available on request . All dimensions approximate.

 

                    NEODYMIUM DISCS

Rare earth Magnets
Rare earth Magnets
Rare earth Magnets
Rare earth Magnets
magnets for sale
magnets for sale
magnets for sale
magnets for sale
neodymium magnets
neodymium magnets
neodymium magnets
neodymium magnets
Magnets
Magnets
Magnets
Magnets
Magnets
Magnets
Magnets
magnet
magnet
magnet
magnet
magnet
magnet

 
 Part No. Grade in MGO Dimensions/inches Approx. Weight/Lbs Price per piece
Diameter Thick 1pc. 4pcs. 25pcs. 50pcs. 100pcs.
ND022N-27 27 0.197 0.059 0.00048 0.64 0.62 0.60 0.46 0.38
ND025-27 27 1.000 0.500 0.10510 13.54 12.58 11.61 10.06 7.74
ND30N-27 27 1.000 0.750 0.15738 27.83 25.84 23.85 20.67 15.90
ND040-27 27 0.875 0.450 0.07225 25.40 23.67 21.89 19.04 13.06
ND048-27H 27H 0.875 1.000 0.16055 36.82 32.88 29.59 23.67 19.73
ND048N-27 27 0.875 1.000 0.16055 28.00 26.00 24.00 20.80 16.00
ND048N-35 35 0.875 1.000 0.16055 32.20 29.90 27.60 23.92 18.40
ND050-27 27 0.866 0.393 0.06200 12.67 11.77 10.86 9.41 7.24
ND060N-27 27 0.375 0.100 0.00296 0.55 0.53 0.52 0.39 0.33
ND064N-30 30 0.750 0.187 0.02211 5.27 5.00 4.90 3.72 3.10
ND103N-27 27 0.500 0.125 0.00655 1.37 1.32 1.29 0.96 0.81
ND105-27 27 1.000 0.187 0.03921 8.37 7.77 7.17 6.21 4.78
ND105-35 35 1.000 0.187 0.03921 8.38 7.80 7.20 6.25 4.80
ND110N-35 35 1.000 1.000 0.2094 33.00 29.00 26.00 22.00 17.00
ND118197-27 27 0.118 0.197 0.00058 0.63 0.62 0.60 0.47 0.39
ND125N-27 27 1.000 0.250 0.05243 10.50 9.75 9.00 7.80 6.00
ND125125 35 0.125 0.125 0.00041 0.30 0.28 0.27 0.21 0.18
ND12525N-27 27 0.125 0.250 0.00082 0.30 0.29 0.28 0.21 0.175
ND140N-35 35 0.500 0.200 0.01052 1.96 1.89 1.84 1.38 1.15
ND142N-35 35 0.750 0.375 0.04423 4.97 4.80 4.68 3.51 2.93
ND143N-27 27 0.500 0.250 0.01320 3.74 3.61 3.52 2.64 2.20
ND144N-35 35 0.375 0.200 0.00592 1.18 1.10 1.07 0.80 0.69
ND145N-27 27 0.250 0.200 0.00262 1.11 1.07 1.04 0.78 0.65
ND146N-35 35 0.250 0.100 0.00131 0.39 0.37 0.36 0.27 0.23
ND150N-35 35 1.000 0.375 0.07864 15.78 14.65 13.53 11.72 9.02
ND150Z-35 35 1.000 0.375 0.07864 8.70 8.40 8.21 6.25 5.25
ND151N-27 27 0.500 0.500 0.02621 3.23 3.12 3.04 2.28 1.90
ND187N-27 27 0.375 0.250 0.00740 2.59 2.50 2.44 1.83 1.53
ND18703-27 27 0.187 0.030 0.00221 0.47 0.45 0.44 0.33 0.28
ND18725N-35 27 0.187 0.250 0.00184 1.50 1.45 1.42 1.09 0.93
ND2012N-35 35 0.375 0.375 0.01106 2.13 2.13 2.00 1.50 1.28
ND2412N-35 35 0.238 0.118 0.0038 0.43 0.41 0.37 0.34
ND283N-35 35 0.250 0.250 0.00328 0.68 0.66 0.64 0.48 0.40
ND308N-27 27 0.187 0.060 0.00044 0.48 0.46 0.45 0.34 0.29
ND381-35 35 0.375 1.000 0.02949 6.10 5.89 5.75 4.35 3.65
ND3806N-35 35 0.375 0.06 0.00177 0.49 0.47 0.45 0.35 0.29
ND5006N-35 35 0.5 0.06 0.00314 0.72 0.69 0.64 0.51 0.42
ND501-35 35 0.500 1.000 0.05243 11.13 10.34 9.54 8.27 6.36
ND6006N-35 35 0.750 0.100 0.01181 2.25 2.17 2.12 1.59 1.33
ND7575N-35 35 0.75 0.75 0.0825 11.00 9.50 8.30 7.80 6.70

KEY: H = higher heat capacity , � = Available with or without nickel plating

NOTE: A second �N� in the part # indicates nickel plating. �Z� = zinc plating

Tolerances: � 0.05 on diameter, � 0.02 on thickness.

 

 

 

Magnet Materials
Magnet Materials Cost

Index

Strength Index Permanence

Index

Easy to

Machine

Max.Oper. Temp. C:F Optimum Dia : Thk FieldDepth
Alnico Magnets 30% 20% 3% 10% 540/ 1 : 4 long
Bonded Magnets 50% 25% 40% 95% 150/ Mpoles short
Ceramic Magnets 5% 20% 50% 10% 300/ 8 : 1 med
Flexible Magnets 2% 4% 7% 60% 100/ Mpoles short
NdFeB Magnets 50% 75% 60% 10% 150/ 10 : 1 med
SmCo Magnets 75% 60% 75% 10% 300/ 8 : 1 med

 

Choosing a Magnet:

Discovering the specific magnetic performance for your application requires:

Download Catalogs
Study. List of reference Books.
Consulting. $30/half hour, agreement by E-mail.
Testing. Order samples by E-mail.

Standards:

When choosing your magnet material remember; the data listed in these tables are for reference only. U.S. magnetic characteristics have standard tolerances set by the MMPA (Magnet Manufacturer & Producers Association). These standards are available upon request. They are the default standard if no specific standards are stated in a U.S. quotation. MIL-STD, Special Q.C., Certification and BH curves are available upon request.

Machining:

Magnet materials are difficult to machine, except Flexible and Bonded, because they are brittle and the dust sticks to everything. To have magnets cut is expensive ($150 minimum set up). To make a mold is expensive ($3500 min.). Designing your application around an industry standard magnet can SAVE YOU BIG MONEY. You can normally over design your magnet for your application.   In most cases an industry standard magnet, because it is mass produced and stocked, will cost less than the specific magnet you envision.

West Coast

A-L-L Magnetics Inc.

2831 E Via Martens.

Anaheim, CA 92806

Toll free 800-262-4638

Phone  714-632-1754

Fax   714-632-1757

E-mail:sales@ magnets-magnets.com

web pages:www. magnets-ceramic.com

Central and Northeast

Master Magnetics Inc.

607 S. Gilbert

Castle Rock, Co 80104

Toll free 800-525-3536

Phone: 303-688-3966

Fax: 303-688-5303

E-mail:magnet@ magnetsource.com

web pages:www. magnetsource.com

Southeast

Miami Magnet Company

6073 N. 167th St., C26

Miami, FL 33015

Toll Free  800-222-7846

Phone  305-823-0641

Fax  305-823-1603

E-mail:magnet@ magnetsource.com

web pages:www.magnetsource.com

Thank you for visiting “Magnets Menu”.
We will beat any written price, delivery time and quality.
Magnet Materials Magnet Products About Us E-Mail Order
© Copyright All Magnetics Inc..

 

Alnico
Alnico Advantages (+) Alnico Disadvantages ( – )
Long field depth Easy to demagnetize
High heat stability 975�-1020�F Hard and brittle to machine, must be ground
Corrosion resistant Expensive due to Nickel and Cobalt

 

   1. Price list of stock sizes:

  Alnico Plugs   Alnico Channel Horseshoes Alnico Bars  
  Alnico Horseshoes   Alnico Holding Magnets Alnico Rods  

   2. Alnico Magnet Basics information:

Made from aluminum, nickel, cobalt, copper, iron and sometimes titanium.

They can be either cast (poured) or sintered (pressed and baked).

They are often used in sensor applications because of their long feild depth.

They are supplied “as cast” or ground on selected surfaces. An as cast surface will look brown / grey / red. A ground surface will look shiny like Nickel.

The Alnico horseshoe shape, used long ago, has become an icon for magnets, even though this shape is increasingly replaced. Alnico horseshoes can often be replaced by ceramic assemblies to save money.

The most common grades of alnico are 5 & 8.

The optimum geometry for alnico is unique among magnets. The length is best to be about 4 times the diameter. Magnetized through the length.

Custom sizes available in 3-4 weeks. Stock sizes and price list available upon request by E-mail.

  3. Engineering Information:

CAST ALNICO

      Cast alnico is melted and poured into a mold. Once solidified, the material is rough ground and then heat treated and cooled, sometimes in a magnetic field. When treated in the presence of a magnetic field, the magnet is called and isotropic. This orients the material to take on maximum magnetic field is called isotropic. After heat treatment and cooling, the material can be ground to specific tolerances and then magnetized.

ATTRIBUTES OF CAST ALNICO

        Size parameters range from 1 ounce to about 70   pounds

        Will cast to a variety of shapes and sizes

SINTERED ALNICO

      Sintered alnico is made from a powdered mixture of ingredients that are pressed in to a die under tons of pressure, sintered in a hydrogen atmosphere and then cooled either within a magnetic fielded or without (an isotropic vs. isotropic ).

ATTRIBUTES OF SINTERED ALNICO

           Size parameters range from about one ounce of material up to one cubic inch

           Pressed to close tolerances/minimal grinding to finish

           Mechanically strongest of alnicos

ATTRIBUTES OF BOTH CAST AND SINTERED ALNICO

  • very temperature stable, great for high heat applications
  • Maximum working temperature  975�-1020�F
  • May be ground to size
  • Does not lend itself to conventional machining (hard & brittle )
  • High residual induction and energy product compared to ceramic material
  • Low coercive force compared to ceramic and rare earth materials (more subject to demagnetization )
  • Most common grades of alnico are 5 & 8

APPLICATIONS OF ALNICO MAGNETS

Magnetos, separators, sensors, electron tubes, traveling wave tubes, radar, holding magnets, coin acceptors, clutches and bearings, motors, relays, controls, generators, receivers, telephones, microphones, bell ringers, guitar pickups, loudspeakers, security systems, cow magnets, distributors.

TYPICAL MAGNETIC & PHYSICAL PROPERTIES OF ALNICO MAGNET MATERIAL

Anisotropy Alnico Density Maximum energy Product BH(max) Residual induction Br Coercive Force Hc Intrinsic Coercive Force Hci Maximum Operating Temperature Curie Temperature
ibs/in� g/cm� MGO Gauss Oersteds Oersteds F� C� F� C�
Alnico5(cast) 0.264 7.3 5.5 12800 640 640 975 525 1580 860
Alnico8(cast) 0.262 7.3 5.3 8200 1650 1860 1020 550 1580 860
Alnico5(sintered) 0.250 6.9 3.9 10900 620 630 975 525 1580 860
Alnico8(sintered) 0.252 7.0 4.0 7400 1500 1690 1020 550 1580 860

TOLERANCES

    Unless specified otherwise, our tolerances on alnico material meet and often exceed Magnet Materials Producers Association (MMPA) standards. For unfinished surfaces ( as cast) the following tolerances apply :

0-1″ �.016                 1-3″ �.031               3-5″ �.047     

5-7″ �.062                  7-9″ �.078              9-12″ �.094

Finished surfaces are normally ground to �.005

MAGNETIZING & HANDLING

         Magnetizing is done after the magnet has been machined to the correct tolerances. Care should be taken when handling alnico material since it is brittle and can chip or break if dropped on a hard surface. Also, because it has a low resistance to demagnetization, it attracting each other, or with a steel keeper.

MACHINING

        Alnico is a very hard and brittle material and does not lend itself to conventional machining. The Magnet Source ™ employs experienced machinists and the proper equipment to grind alnico to its required dimensions .    

    Sintered Al-Ni-Co Magnetic Characteristics:

Grade Oriented Br

(KGs)

Hc

(KOe)

Hci

(KOe)

(BH)max

(MGOe)

CurieTemp

C : F

MaxOpTemp

C : F

Alnico 2 Isotropic 7.1 0.55 0.55 1.4 860 540
Alnico 5 Anisotropic 10.8 0.60 0.60 3.8 860 540
Alnico 6 Anisotropic 9.4 0.79 0.80 2.9 860 540
Alnico 8 Anisotropic 7.2 1.50 1.69 4.0 860 540

Cast Al-Ni-Co Magnet Characteristic:

 

Grade Oriented Br

(KGs)

Hc

(KOe)

Hci

(KOe)

(BH)max

(MGOe)

CurieTemp

C : F

MaxOpTemp

C : F

Alnico1 Isotropic 7.2 0.47 0.48 1.4 860 540
Alnico 2 Isotropic 7.5 0.56 0.58 1.7 860 540
Alnico 5 Isotropic 7.0 0.48 0.50 1.35 860 540
Alnico 5 An isotropic 12.5 0.64 0.64 5.5 860 540
Alnico 5-7 An isotropic 13.5 0.74 0.74 7.5 860 540
Alnico 6 An isotropic 10.5 0.78 0.80 3.9 860 540
Alnico 8 An isotropic 8.2 1.65 1.65 5.3 860 540

Note: The grades listed are typical for the industry. If you need special characteristics then we have other grades available.

 

Alnico
Alnico Advantages (+) Alnico Disadvantages ( – )
Long field depth Easy to demagnetize
High heat stability 975�-1020�F Hard and brittle to machine, must be ground
Corrosion resistant Expensive due to Nickel and Cobalt

 

Our magnets for sale (product listing)

 

  • Sintered NdFeB Strong Cube Magnets
  • Sintered Neodymium 216 Balls Neocube Zenballs Buckyballs Gold Coating
  • Sintered Neodymium Arc Magnets

where to buy magnets

  • Sintered Neodymium Iron Boron Block Magnets
  • Sintered Neodymium Iron Boron Permanent Rectangular Magnet

 

  • Sintered Neodymium Iron Boron Self-adhesive Magnet

 Neodymium Magnets
Neodymium Magnets
Neodymium Magnets
Neodymium Magnets

  • Sintered Neodymium Rare Earth 3M Self-adhesive Magnet
  • Sintered Neodymium Rare Earth Self-adhesive Magnet
  • Sintered Neodymium Segment Magnets
  • Sintered Neodymium Strong Disc Magnet
  • Sintered Neodymium-Iron-Boron Arc Magnets
  • Sintered Neodymium-Iron-Boron Bar Magnets
  • Sintered Neodymium-Iron-Boron Block Magnet
  • Sintered Neodymium-Iron-Boron Disc Magnets
  • Sintered Neodymium-Iron-Boron Magnetic Ring
  • Sintered Neodymium-Iron-Boron Motor Magnets
  • Magnetic push pins
  • Sintered Neodymium-Iron-Boron Nickel (Ni/Cu/Ni) Coating Countersunk Magnet
  • Sintered Neodymium-Iron-Boron Permanent Segment Magnets
  • Sintered Pemanent Hard Ferrite Pot Magnet with Threaded Screw
  • Sintered Permanent Neodymium Magnets With Countersunk Holes
  • Sintered Permanent Rare Earth Self-adhesive Magnet
  • Sintered Ring NdFeB Permanent Magnet
  • Sintered Samarium Cobalt Block Magnet
  • Sintered Small Neodymium Magnetic Block
  • Sintered SmCo Disc Magnets
  • Sintered Thin Neodymium Rectangular Magnet
  • Sintering AlNiCo Bar Rod
    • Small Block Neodymium-Iron-Boron (Nd-Fe-B) Magnets

Neodymium Magnets
magnets for sale

  • Small Block Samarium Cobalt Rare Earth Magnet
  • Small Disc Cylinder Sintered NdFeB
  • Small Epoxy Plated Permanent Disc Magnet
  • Small Neodymium Rod Magnets
  • Small Nickel Plating Permanent Disc Magnet
  • Small Ring NdFeB Permanent Magnet
  • Small Sintered Neodymium 3M Self-adhesive Magnet
  • Small Sintered Neodymium-Iron-Boron Cube Magnets NeoCubes
  • SMCO magnets
  • Sphere Sintered NdFeB Magnet
  • Square Block Strontium Ferrite Magnet
  • Stainless steel cow magnet
  • Strong 3M Self-adhesive NdFeB Magnet
  • Strong Countersunk Hole NdFeB Magnet Disc
  • Strong magnetic force SmCo Rare Earth Magnet
  • Strong Neodymium Cylinder Stick Magnet
  • Strong Neodymium Pot Countersunk Magnets Wholesale
  • Strong Neodymium-Iron-Boron Cube Magnet
  • Strong Permanent Magnetic Lifter
  • Strong Powerful Magnetic Door Catcher
  • Strong Rectangule NdFeB Magnet
  • Strong Shallow Pot Magnetic Hook Magnet
  • Strong Sintered Ferrite Countersunk Pot Magnet with Stainless Steel
  • Strong Sintered Neodymium Countersunk Pot Magnet
  • Strong Sintered Neodymium Hook Pot Magnet
  • Super Neodymium Rectangular Magnet
  • Super Permanent Disc Self-adhesive Magnet
  • Super Rectangular Neodymium Magnet

magnets for sale 

  • Super Small Block Neodymium Magnet
  • Super Sphere Sintered Neodymium Magnet
  • Super Strong Big Disc Magnet
  • Super Strong Disc Neodymium Magnet
  • Super Strong Disc Self-adhesive Magnet
  • Super Strong Magnetic Door Catcher Assembly
  • Super Strong N50 Neodymium Magnets With Countersunk Holes
  • Super Strong N52 Cylinder Neodymium Magnet
  • Super Strong NdFeB Magnetic Rings
  • Super Strong Neodymium Bulk Rectangle Magnet
  • Super Strong Ring Neodymium Magnet
  • Super Strong Rod NdFeB Magnets
  • Thin Permanent Rare Earth Block Magnet
  • Thin Ring Sintered NdFeB Magnet
  • Thin Small Disc Sintered Neodymium-Iron-Boron
  • Threaded Ferrite Pot Magnet Magnetic Holders
  • Tiny Permanent Disc Disk Neodymium Magnet
  • TS16949 N40H Rare Earth Bar NdFeB Cylinder Magnets
  • U shape Alnico Magnet
  • U shape AlNiCo School Magnet
  • Various Magnetic Holding Assemblies
  • Various Magnetic Holding Assemblies with Customers’ Requirements
  • White Magnetic Door Catcher & Holder
  • White Permanent Block Neodymium Magnet Magnetic Door Catcher Assembly
  • Whiteboard Magnet Accessories Magnetic Memo Holder
  • Whiteboard Magnet Magnetic Memo Holder
  • Y30bh Sintered Hard Ferrite Disc Magnet
  • Y35 Hard Sintered Block Permanent Ferrite Magnet
  • Y35-Y40 Y30-35BH Disc Disk Isotropic Ferrite Magnet
  • Zinc Coating NdFeB Permanent Countersunk Pot Magnet
  • Zinc Coating Rare Earth Neodymium Countersunk Pot Magnet
  • Zinc Plated Curved Neodymium Magnet
  • Zinc Plated Large Sintered Countersunk Neodymium N40 Magnets
  • Zinc Plated Small N50 Block Magnet
  • Zn Coating Sintered NdFeB Countersunk Pot Magnet
  • Zn Plated Strong Block NdFeB Magnet